Technol GRP sedimentation tanks are produced with a resistant internal chemical liner and mechanical structure to ensure a long lasting service life without any maintenance costs.
With inserting the parallel plate, the sedimentation in this tank is the most economic process to remove sludge, sand and silts in surface water, chemical precipitation and flocculation form solids.
Product features:
The sedimentation tank can be adjusted to specific requirements by choosing
Lamellas Type 1 | Lamellas Type 2 | |
Potable and process water | Surface water, Ground water, Filter backwash water | |
Waste water | Aquaculture, Humus tanks behind fixed film processes, Flocculated water, Storm water | Primary sedimentation, Activated sludge with low sludge volume |
Height of Module H = 1 m
Inner diameter D | Width B | Total height H | Volume Water | Projected sedimentation area P | ||
Type | [m] | [m] | [m] | [m3] | Type 1 [m2] | Type 2 [m2] |
SED-tech LAM 29 | 1,40 | 1,00 | 2,7 | 2,9 | 9,0 | 5,1 |
SED-tech LAM 38 | 1,60 | 1,20 | 2,9 | 3,8 | 13,5 | 7,7 |
SED-tech LAM 49 | 1,80 | 1,30 | 3,2 | 4,9 | 17,5 | 9,9 |
SED-tech LAM 66 | 2,00 | 1,50 | 3,4 | 6,6 | 23,5 | 13,3 |
SED-tech LAM 78 | 2,20 | 1,70 | 3,5 | 7,8 | 30,3 | 17,2 |
SED-tech LAM 97 | 2,40 | 1,90 | 3,7 | 9,7 | 38,1 | 21,6 |
SED-tech LAM 119 | 2,60 | 1,90 | 3,9 | 11,9 | 42,3 | 24,0 |
SED-tech LAM 141 | 2,80 | 2,10 | 4,0 | 14,1 | 51,3 | 29,2 |
SED-tech LAM 166 | 3,00 | 2,30 | 4,2 | 16,6 | 61,3 | 34,8 |
SED-tech LAM 194 | 3,20 | 2,50 | 4,4 | 19,4 | 72,1 | 41,0 |
SED-tech LAM 240 | 3,50 | 2,80 | 4,7 | 24,0 | 90,0 | 51,1 |
Calculated flow rate of sedimentation depending on the quality of water to be treated.
* Special sedimentation tanks can be manufactured upon request